OP Notify: Call Notification Event

Version 14.19

This content is part of the OP Notify Training Program.

Note: The On Demand Notification Event must be created before creating the Call event.

The Event page is followed by the Delivery Rule page and the Call page (when Call is selected as the delivery method). After the Event page has been completed and the Next button has been selected, the Delivery Rule page appears. Once the Delivery Rules are complete and the Next button has been selected, the Call page appears. You will create your voice message on the Call page.

Call Delivery Rule

After the Delivery Rule page appears, complete the Delivery Rule information:

  1. Verify the Active slide is set to ON. It is best practice to set Active to ON because On Demand messages are typically sent immediately after they are created.
  2. Click the drop-down arrow for Method and select Call.

  1. Click the Next button to proceed to the Call information page.

Voice and Recording Message

After the Call page appears, create the voice and recording message:

  1. Enter the Call ID Number. This field is required.
  2. Select the maximum number of retries in the Max Retries drop-down field. The number of retries range from 0 to 9.
  3. Enter the number of minutes between the retry attempts in the Period Between Retries field. The number of minutes range from 1 to 120.
  4. Type the message for the On Demand Notification in the Voice Message field. This field will be used when a person answers the call. Use tokens in the Voice Message field to personalize the message. To use a token:
  1. Locate the area of your message where you want to enter a personalized item (example a patient's first name) and place your cursor. The cursor location will indicate where the token will be placed in the message.
  2. Select the Insert Token drop-down.
  3. Select the token item that you want to enter into the message.

  1. (Optional) Once the message is complete, click the Play Message button to listen to the voice message.
  2. Since not all touch tone options are available, deselect the Include touch tone options checkbox.
  3. Type the message for your On Demand Notification in the Recording Message field. This field will be used when a the call goes to voicemail. You can also copy the message from the Voice Message field and paste it into the Recording Message field. Use tokens in the Recording Message field to personalize the message. To use a token:
  1. Locate the area of your message where you want to enter a personalized item (example a patient's first name) and place your cursor. The cursor location will indicate where the token will be placed in the message.
  2. Select the Insert Token drop-down.
  3. Select the token item that you want to enter into the message.

Note: The optional step of enabling voicemails and recordings in Spanish requires that the Language drop-down for the Family Contact be set to Spanish. If no Language is selected the recordings will use the Language of the patient set on the Basic Information window.

  1. (Optional) Enable voicemail messages and recording messages in Spanish:
  1. Click on the Spanish tab. Clicking on the Spanish tab displays the Active button.

  1. Click on the Active button so that it indicates that it is On.

  1. Enter the Spanish translation in the Voice and Recording message fields.
  1. (Optional) Once the message is complete, click the Play Message button to listen to the Recording Message.
  2. (Optional) Send a test call. Enter a phone number to hear an example of the message(s). To hear the message created in the Recording Message field, the call must go to voicemail or an answering machine. To send the test call:
  1. Enter your number in the Caller ID field. This will be the number that is displayed on the recipients caller ID.
  2. Enter the phone number where you want to send the test message in the Enter Phone Number field.
  3. Click the Test button. the test will be performed.
  1. Click the Send button when the test is successful.
Version 14.10
 WARNING: This information is intended only for clients currently in the implementation or production phase with OP Notify functionality.


The On Demand Notification Event must be created before creating the Call event.

The Event page is followed by the Delivery Rule page and the Call page (when Call is selected as the delivery method). After the Event page has been completed and the Next button has been selected, the Delivery Rule page appears. You will set your notification call method on the Delivery Rule page. Once the Delivery Rules are complete and the Next button has been selected, the Call page appears. You will create your voice message on the Call page.

Call Delivery Rule

After the Delivery Rule page appears, complete the Delivery Rule information:

  1. Verify the Active slide is set to ON. It is best practice to set Active to ON because On Demand messages are typically sent immediately after they are created.
  2. Click the dropdown arrow for Method and select Call.

  1. Click the Next button to proceed to the Call information page.

Voice and Recording Message

After the Call page appears, create the voice and recording message:

  1. Enter the Call ID Number. This field is required.
  2. Select the maximum number of retries in the Max Retries dropdown field. The number of retries range from 0 to 9.
  3. Enter the number of minutes between the retry attempts in the Period Between Retries field. The number of minutes range from 1 to 120.
  4. Type the voice message for your appointment notification in the Voice Message field. This field will be used when a person answers the call. Use tokens in the Voice Message field to personalize the message. To use a token:
  1. Locate the area of your message where you want to enter a personalized item (example a patient's first name) and place your cursor. The cursor location will indicate where the token will be placed in the message.
  2. Select the Insert Token dropdown.
  3. Select the token item that you want to enter into the message.

  1. (Option) Once the message is complete, click the Play Message button to listen to the voice message.
  2. Since not all touch tone options are available, deselect the Include touch tone options checkbox.
  3. Type the recording message for your appointment notification in the Recording Message field. This field will be used when a the call goes to voicemail. You can also copy the message from the Voice Message field and paste it into the Recording Message field, but be certain to remove the touch tone options you added in the previous message. Use tokens in the Recording Message field to personalize the message. To use a token:
  1. Locate the area of your message where you want to enter a personalized item (example a patient's first name) and place your cursor. The cursor location will indicate where the token will be placed in the message.
  2. Select the Insert Token dropdown.
  3. Select the token item that you want to enter into the message.
Note: The optional step of enabling voicemails and recordings in Spanish requires that the primary Language dropdown in the Patient tab of the Patient Registry be set to Spanish. This feature also requires that Call be selected as the Method type Delivery Rule in OP Notify.
  1. (Option) Enable voicemail messages and recording messages in Spanish:
  1. Copy the English version of the text from the Voice Message field on the English tab.
  2. Click on the Spanish tab. Clicking on the Spanish tab displays the Active button.

  1. Click on the Active button so that it indicates that it is On.

  1. Paste the English version of the text in the Voice Message field on the Spanish tab. OP Notify automatically translates the English text to a Spanish voicemail when the message is sent.
  2. Repeat Steps a through d for the Recording Message field.
  1. (Option) Once the message is complete, click the Play Message button to listen to the Recording Message.
  2. (Option) Send a test call. Enter a phone number to hear an example of the message(s). To hear the message created in the Recording Message field, the call must go to voicemail or an answering machine. To send the test call:
  1. Enter your number in the Caller ID field. This will be the number that is displayed on the recipients caller ID.
  2. Enter the phone number where you want to send the test message in the Enter Phone Number field.
  3. Click the Test button. the test will be performed.
  1. Click the Save button when the test is successful.
Version 14.8

OP Notify was implemented in Version 14.9.